QUARTERLY NOTES (CONTINUED)
ROAD WHEEL ARM BEARINGS AND LOCKOUT CYLINDERS
Lubricate road wheel arm bearings and lockout cylinders weekly,
with GAA, when operating in muddy or rough environment.
Lubricate quarterly, or every 750 mi (1207 km), during normal
BRAKE CONTROL SHAFT
B Clean with CLP and coat splines with GAA.
Brake pedal is spring Ioaded. Before
working in driver's compartment, block
vehicle tracks end release parking brake.
Coat ratchet teeth with GAA and lubricate con-
trols with CLP.
AUXILIARY DRIVE CLUTCH HOUSING BREATHER, OIL LEVEL, AND FILL
Clean breather and check oil level.
A Remove fan well cover.
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
B Remove breather (1), clean with solvent SD2 and install.
C Check that oil level is at FULL mark on gage (2).
D Remove fill plug (3) and fill with oil (OE/HDO or OEA) as
E Clean fill plug (3) with solvent SD2 and install.
C a r d 15 of 40