SEMIANNUAL NOTES (CONTINUED)
Note 45
BOOM WINCH AND TOW WINCH DRUM AND CABLE
Perform the following semiannually if winch or cable has not been used.
A Unwind and clean entire cable.
B
Brush-soak cable and drum with oil (OE/HDO, OEA, or CLP).
Wipe off excess oil and coat cable and drum with lubricating
C
oil, CW-II.
BOOM AND TOW
WINCH CABLES
Note 46
TOW HOOK PINS
A Remove pins.
r
1
WARNING
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
well-ventilated area.
B
Clean pins with SD2.
C
Lubricate with GAA and install.
TOW HOOK
Wipe off excess grease.
D
C a r d 26 of 40
LO 9-2360-238-12