HIGH PERFORMANCE RESCUE HOIST ASSEMBLY
ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
ITEM TO BE
Visually inspect for nicks, cracks, or corrosion. Ensure
smooth operation, free of binding or sticking. Check
plunger locking device by placing plunger in locked
position and attempt to rotate height adjuster.
Check upper and lower quick disconnects for corrosion
and cracks. Check locking action of jaw when placed in
closed position. Ensure safety clip is installed.
Inspection shall be in accordance with WP 0029 00 and
Slide extension arm forward and aft on arm pivot,
binding should not occur. If binding occurs, replace
quick disconnect for smooth operation. Check for
cracks, nicks, or dents. Check release pin for damage.
Visually inspect for cracks, loose mounting hardware,
and corrosion. Check for dents on stanchion tube, upper
and lower support, and switch cover. Check aircraft
position plate for legibility and security of attachment.
Inspect pendant storage hook and spring for damage
and security. Inspection shall be in accordance with WP
Visually inspect for cracks or dents. Press to test
Visually inspect for cuts, tears, fraying, or broken
insulation. Inspection shall be in accordance with WP
Visually inspect for cracks, dents, broken power light,
and security of switches.
Ensure cable cutter switch is safely wired using
Limit Switch Drive
Visually inspect for cracks, nicks, or corrosion. Check
electrical wiring for frayed or broken insulation.