Starter Generator 12V
The following tools and materials should be available.
Battery cable and terminal cleaning tool
Hand tools for tightening belts and connections
Baking soda and water
Briggs & Stratton 19236 VOA meter or Eico
Model 540 Readi-Tester.
4 to 6 amp taper battery charger
Check for clean, corrosion-free and tight connections.
Hydrometer reading should be a minimum of 1.225 and
each cell should read within less than .050 variation after
charging. Battery must meet these conditions before
conducting starter generator tests.
Fig. 132 - wiring Diagram