N o . Required
piece to the car floor with four 30d nails. Nail the top piece to the one
below with four 30d nails.
steel cable, doubled. Attach to the front and rear towing and tiedown
provisions and to stake pockets on opposite sides of car. See figure 5.
cable clips. Secure the steel cable with four clips each, with one clip
securing each thimble. See items H and K, figure 6.
thimbles. Locate one thimble under each stake pocket and secure to
the cable with one clip each. See item K, figure 6.
a. Load as shown is based on a flatcar 10 ft 6 in wide (platform).
will be applied with the hand levers wired
or blocked. Gearshift levers for
cab and boom must be locked in travel position with the hoist hook engaged in the center towing
eye and the hoist cable taut.
c. F o r
the Loading of Commodities on Open Top Cars" and General Rules 3, 4, 5, 9, 10, 14, 15, and 19A