Table 3-1. TROUBLESHOOTINGCONTINUED
TEST OR INSPECTION
Failure to observe the following procedure
will result in catastrophic failure of equipment
and possible loss of life.
If engine shutdown control does not
work, place transmission shift lever in
range 4 and apply brakes to load engine
down, If engine fails to load down, shift
into neutral, lock brakes, and abandon
vehicle. Notify unit maintenance person-
12. OIL PRESSURE TOO LOW OR TOO HIGH.
Check engine rpm.
Increase engine speed to 800 rpm. If oil pressure gauge reads low
and warning horn continues to sound, go to step 2.
Step 2. Check to see if transmission oil is low,
Open transmission access door and check oil level. Level should be
within operating range on dipstick (11. Add oil as required (appx G).