TM 9-2350-238-34-2
7
8
9
10
Install two boom cylinder hinge pin lock-
ing plates (8), four Iockwashers (7), and
four hexagon capscrews (6) on crane
boom (1).
NOTE
Steps 8 through 13 are written and
illustrated for removal of one boom
winch control cylinder assembly, but
apply to both.
Remove two hexagon head capscrews
(10), two Iockwashers (11), and boom
cylinder hinge pin locking plate (12) from
lower boom cylinder headless straight pin
(13) of boom winch control cylinder
assembly (4).
NOTE
Number of spacers in step 9 may
vary depending on alinement of
boom winch control cylinder
assembly.
Using pry bar, pry out lower boom
cylinder headless straight pin (13) from
lower end of boom winch control
cylinder assembly (4). Remove three
spacers (14).
Install boom cylinder hinge pin locking
plate (12), two Iockwashers (11), and
two hexagon head capscrews (10) in
each anchor after removing lower boom
cylinder headless straight pin (13).
2-87