2-30. MAINTENANCE OF VEHICLE TOW
1 Coat mating surfaces of new carrier hous-
ing plain encased seal (1) and winch brake
housing (2) with sealing compound (item
18, appx B). Using hammer and drift, in-
stall new carrier housing plain encased
seal (1 ) on winch brake housing (2).
2 Install pipe plug (3) and new preformed
packing (4) in winch brake housing (2).
DRUM WINCH (CONT).
3 Support planetary winch drum (5) in a ver-
tical position with winch control end on
4 Install winch brake (2) on planetary winch
drum (5) and secure with 11 socket head
capscrews (6). Torque socket head
capscrews to 40 ft-lb (54 N-m).
5 Install self-aligning roller bearing (7) on
winch brake housing (2).