OF STAGE ONE CARRIER ASSEMBLY (CONT).
6 if necessary, grind welds securing retain-
ing stop ring (11) and remove spur gear
(10) and retaining stop ring from carrier
1 Inspect for broken, damaged, or missing parts.
2 If carrier is damaged, repair is by replacement of next higher assembly.
3 Repair is by replacement of authorized parts (TM 9-2350-238-24P-2).
If retaining stop ring and spur gear
were removed, new welds are
necessary during reassembly.
1 If removed, install new retaining stop ring
(1) in groove in spur gear (2).
2 Insert spur gear (2) into carrier (3), seating
retaining stop ring (1) firmly against carrier.
Weld retaining stop ring to carrier.
Do not weld to spur gear.
3 Weld retaining stop ring (1) to carrier (3)
with 0.12-in. (0.30-cm) fillet welds. Weld
three 1.00-in. (2.54-cm) spots placed an
equal distance apart around circle of re-
taining stop ring IAW MlL-STD-1261C