Adjust gear shaft thrust plug (5) until
seated, then back off three full turns.
From above cab deck, install two final
drive retainer plates (6) and six hexagon
capscrews (7). Torque six hexagon
capscrews to 135 to 150 ft-lb (183 to
203 N-m). Install new Iockwire (8) to
secure six hexagon capscrews (7).
Rig hoist and sling through riggers
cupola opening. Attach sling to hydraulic
drain tee (9) and traverse brake control
shuttle valve (10) of cab traversing unit
Lift cab traversing unit (11) through rig-
gers cupola opening and install in cab.