TM 9-2350-238-34-2
2-48. MAINTENANCE OF TRAVERSING HYDRAULIC MOTOR (CONT).
DISASSEMBLY
Disassembly and reassembly of
traversing hydraulic motor should be
performed in clean, dry, dust-free
area to keep dirt out of components.
1 Remove eight capscrews (1), two motor
control line multiple connectors (2), and
two preformed packings (3).
2 Remove key (4) from shaft (5).
3 Remove four screws (6) and remove rear
housing (7) from front housing (8).
4 Using retaining ring pliers, remove retain-
ing ring (9) and remove shaft (5) from
front housing (8).
2-248