TM 9-2350-256-10
Table 2-1. PMCS-Continued.
Location
Crewmember
Not Fully
Item
Item to
Mission
No.
Interval
Check/
Procedure
Capable if:
Service
54
Weekly
ANNVS-2
Remove battery cap (2)
Cont.
(V)1A
and ensure battery has
Periscope
been removed. Reinstall
cap.
Check that OFF-BRIGHT
knob is set to OFF and
not broken.
Turn mount (3) to position
detent and aline sides of
mount with sides of
periscope (4).
Press and hold lever (5)
and raise periscope
through hatch and lock
into place by releasing
lever.
Remove snap-on
eyepiece cover (6) from
periscope and stow in
periscope storage box.
Ensure NIGHT VIEWER
View is
switch is set to OFF.
obstructed or
Remove cap (7) from
unclear.
receptacle (8).
Disconnect power cable
(9) from dummy
receptacle (10) and
connect power cable to
receptacle. Turn
MASTER switch on. Set
NIGHT VIEWER switch to
on.
Turn operator's control
View is
(11) to full brightness.
obstructed or
View through eyepiece.
unclear.
2-92