3-6. SUSPENSION AND TRACK-Continued.
Install wedge (21) and bolt (22) to outside end connector (3).
Repeat step (20) for inside end connector.
Remove chocks (20).
Move vehicle forward and stop when center guide (at the point of connection) is between
compensating idler wheel (10) and first roadwheel (23) and adjacent track links are in a straight line
(same plane). Set vehicle brakes and tighten nut (18) securely.
Adjust track tension (see para. 3-3).
Check tightness of wedge bolts and center guide bolts when next After-Operation
Preventive Maintenance Checks and Services (PMCS) is performed.