TM 9-2350-256-10
2-1. DRIVER'S CONTROLS AND INSTRUMENTS-Continued.
(7)
HOIST WINCH operating lever (7). Selects LOWER, HOLD, and RAISE for hoist cable. It is spring loaded
to stay in HOLD position.
(8)
MAIN WINCH SHIFT lever (8). Selects LOW, NEUTRAL, or HIGH main winching speeds and locks in
desired position.
(9)
HOIST WINCH SHIFT lever (9). Selects LOW, NEUTRAL, or HIGH hoisting speeds. It locks in desired
position. Located right rear of driver on floor.
2-6