10. Troublelight assembly. The troublelight assembly is a portable, hand-held light with a reeled, 25-ft (7.6-m) extension
11. Driver's passive night viewer switch and light. The driver's passive night viewer is controlled by the switch, and the
light indicates when the night viewer is activated.
Miscellaneous Electrical Components
Rigger's light selector switch. The rigger's light selector switch contains a three-position toggle switch that controls
the operation of the rigger's service and IR light.
Accessories panel. The accessories panel contains the accessory outlet socket, a two-position winch light toggle
switch, a two-position ventilating blower toggle switch, a two-position bilge pump toggle switch, a two-position
generator toggle switch, a bilge pump lamp, and a generator lamp.
Ventilating blower. An electric motor driven ventilating blower draws fresh air from outside the vehicle into the crew
compartment for ventilation.
Conduits, Cables, and Connectors
Conduits. Flexible, metallic conduits are used on high-voltage cables to prevent electrical radiation which might
Cables. Electrical cables are rubber covered. The ends of all cables terminate in a pin or socket on a connector, plug,
or receptacle, or at a cable terminal. The cables are crimped or soldered to the pins, sockets, terminals, or ferrules.
Plug and receptacle-type connectors. The plug has four main components: the shell assembly, coupling nut, grommet,
and retaining nut. The receptacle has three components: the receptacle assembly, grommet, and retaining nut. The
receptacle is secured to a box or panel with four screws. The plug is secured to the receptacle with the coupling nut.
A waterproof connection is made with the retaining nut by compressing the grommet to the ends of the plug or shell
assemblies. The shell and receptacle assemblies have either pins or sockets for one or many electrical connections.
Waterproof rubber connectors. Each connector has a male and female component. The female portion consists of a
rubber shell, sleeve, and ferrule. The male part consists of a rubber shell, C-washer, and terminal. The friction-fit
union of the two halves forms a waterproof connection.
END OF WORK PACKAGE
0008 00-3/4 blank