CORRECTIVE ACTION Continued
12. Remove hydraulic brake cylinder hose No. 29 and inspect for restriction (see WP 0416 00). Replace
restricted or damaged hose (see WP 0416 00). If no hose restriction or damage exists and brake still
fails to hold load or creep, notify Direct Support Maintenance. If level winder fails to traverse, go to
Do not attempt to loosen or tighten hydraulic fittings or lines when system is pressurized. Severe injury
or death to personnel may result.
13. Inspect for any damaged or restricted hoses. Replace hoses as necessary (see WP 0416 00). If no
damaged or restricted hoses exist, go to step 14.
14. Adjust main winch level winder cylinders (see WP 0404 00). If level winder fails to traverse after
cylinder adjustment, notify Direct Support Maintenance.
END OF WORK PACKAGE
0030 00-3/4 blank