CORRECTIVE ACTION Continued
11. Place red lead of multimeter in socket B of wire 74 and black lead to ground. If voltage is present, go to
step 14. If voltage is not present, replace/repair wire 82/74 of module starter wiring harness (see WP
12. Reconnect wire 14 to START switch side of circuit breaker. Disconnect wire 10 from circuit breaker.
Place red lead of multimeter in wire 10 and black lead to ground. Turn MASTER switch on and check
for voltage. Turn MASTER switch OFF. If voltage is present, replace circuit breaker (see WP 0159
00). If voltage is not present, go to step 13.