CORRECTIVE ACTION Continued
Do step 6 for front fuel lever transmitter, do step 7 for rear fuel level transmitter.
Reconnect wires 30 and 31 to fuel selector switch. Remove four screws (7), four lockwashers (8), four
flat washers (9), and fuel transmitter center left floor access plate (10). Disconnect wire 30 from fuel
level transmitter on front fuel tank. Place red lead of multimeter in wire 30 at fuel level transmitter and
black lead to ground. If voltage is present, replace fuel level transmitter (see WP 0121 00). If voltage is
not present, repair/replace wire 30 of gage panel to bulkhead wiring harness (see WP 0194 00 for dual
voltage; 0195 00 for single voltage).