Transmission Oil Pressure Gage
Transmission oil pressure gage malfunctioning.
Transmission oil pressure gage does not operate. Do steps 1 thru 8.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry contacts a metal surface a direct
short may result in instant heating of tools, damage to equipment, and injury or death to personnel.
Remove three screws (1), three lockwashers (2), two screws (3), two lockwashers (4), ground strap
(5), and release gage panel (6). Remove gage panel to bulkhead wiring harness from gage panel. Place
red lead of multimeter in socket K of wire 27 and black lead to ground. Turn MASTER switch on
and check for voltage. Turn MASTER switch OFF. If voltage is present, go to step 2. If voltage is not
present, go to step 8.