CORRECTIVE ACTION Continued
Reconnect wire 518 to circuit breaker side of winch light switch. Disconnect wire 518 from panel
connector side of winch light switch. Place red lead of multimeter on terminal of winch light switch
and black lead to ground. Turn MASTER and WINCH LT switches ON and check for voltage. Turn
MASTER and WINCH LT switches OFF. If voltage is present, repair/replace wire 518 of bilge pump
main power wiring harness from winch light switch to panel connector (see WP 0233 00). If voltage is
not present, replace winch light switch (see WP 0158 00).