CORRECTIVE ACTION Continued
Place red lead of multimeter in socket C of wire 91 (ground) and black lead to ground. Check for
continuity. If continuity is present, replace head lamp (see WP 0175 00). If continuity is not present,
repair/replace wire 91 (ground) of headlight and dimmer switch wiring harness (see WP 0214 00).
Reconnect headlight base assembly to headlight assembly. Disconnect headlight and dimmer switch
wiring harness from dimmer switch. Place a jumper wire from socket C to pin C of wire 514/515.
Place red lead of multimeter on pin A of wire 515 and black lead to ground. Turn MASTER switch on,
press B.O. DRIVE key and ENTER key of main light switch, place B.O. SELECTOR to IR, and check
voltage. Turn MASTER, main lighting, and B.O. SELECTOR switches off. If voltage is present, go to
step 7. If voltage is not present, go to step 6.