Main winch cable roller. Lubricate with GAA through two fittings (10).
10. Hoist winch cable roller bearings. Open hoist winch cable access cover (11) and lubricate with GAA through four fittings
(12). Close access cover.
11. Commander's cupola hold-open latch. Lubricate with GAA through fitting (13) at end of pivot pin.
12. Personnel door torsion bar.
There are two fittings on each door.
Lubricate with GAA through four fittings (14).
13. Boom lever pin. Lubricate with GAA through fitting (15).
There is one fitting at each pin.