14. Boom stayline cables.
Never handle cable with bare hands. Broken or frayed wire strands can cause severe cuts. Always wear
protective (leather) gloves when handling cable.
Clean and oil cable (16) with OE. If cable has not been used within a six-month period, clean entire cable and brush soak it
with OE. Wipe cable to remove excess oil. Coat cable with CW.
15. Roadwheel bearings. Lubricate with GAA through six fittings (17) at each side.
16. Compensating idler wheel bearings. If vehicle is without grease fitting (18), remove plug (19) and insert fitting. Lubricate
with GAA through fitting. Remove fitting and install plug.