Remove fuel filter element (6) from filter body (7). Discard fuel filter element.
Solvents can burn easily, give off harmful vapors, and are harmful to skin and clothing. To avoid injury
or death, keep away from open flame and use in a well-ventilated area. If solvent gets on skin or clothing,
wash immediately with soap and water.
Clean inside of filter body (7) with cleaning compound and stiff brush. Scrape off sludge or gum, if necessary.
Attach constant bleed line (2) and install fuel filter element (6).
Install fuel filter head (4) using filter head gasket (5), and tighten retaining screw (3).
Bleed air from primary fuel filter. Activate electric fuel pump until fuel runs from bleeder valve (1), then tighten bleeder