TM 9-2350-256-20-1
0147 00
5.
Remove gasket (7) from fan drive housing cover (5).
6.
Clean fan drive housing cover (5), removing dried adhesive.
Disassembly
1.
Drive or press oil seal (8) from oil seal housing (9).
Assembly
CAUTION
Use care to prevent sealing compound from contacting felt.
1.
Coat flange face of oil seal (8) with sealing compound.
2.
Position oil seal (8) in oil seal housing (9) with lip of seal toward flange surface of housing.
3.
Press oil seal (8) in oil seal housing (9) until seal seats against housing flange.
4.
Remove excess sealing compound.
0147 00-2