Remove engine oil cooler inlet line (1) by loosening union nut (2) at each end.
Remove loop clamp (3) from engine oil cooler outlet line (4) by removing nut (5) and screw (6).
Remove engine oil cooler outlet line (4) by loosening union nut (7) at each end.
Remove two elbows (8) by removing three self-locking nuts (9) and gasket (10) from each.
Solvents can burn easily, give off harmful vapors, and are harmful to skin and clothing. To avoid injury
or death, keep away from open flame and use in a well-ventilated area. If solvent gets on skin or clothing,
wash immediately with soap and water.
Clean two engine oil cooler lines (1 and 4) and two elbows (8) thoroughly with cleaning compound.