Solvents can burn easily, give off harmful vapors, and are harmful to skin and clothing. To avoid injury
or death, keep away from open flame and use in a well-ventilated area. If solvent gets on skin or clothing,
wash immediately with soap and water.
Particles blown by compressed air can be dangerous. Be certain to direct air stream away from user and
other personnel in area. Compressed air used for cleaning will not exceed 30 pounds per square inch
(207 kilopascals). Use only with effective chip-guarding and personal protective equipment (goggles,
shield, and gloves).
Clean filter element (11) with cleaning compound. Dry with compressed air.
Install two preformed packings (10), filter element (11), and filter retainer (9) to cover (14) with three screws (12).
Install spring (15) into filter element assembly (1).
Install cover (8) with preformed packing (13) and filter element (11) to filter element assembly (1) with eight screws (7).