SECTION V: CONTROLS AND LINKAGES
TM 9-2350-256-20
5
Remove straight pin (8) by removing two cotter pins (9) and two washers (10).
6
Remove lubrication fitting (11), cotter pin (12), headed pin (13), and accelerator control pedal assembly (14).
7
Remove screw (15) and nut (16) from accelerator control pedal assembly (14).
8
Remove screw (17), lockwasher (18), and rod (19).
9
Remove clevis (20) and nut (21) from one end of rod (19) and remove bearing (22) and nut (23) from other end
of rod.
9-173