TM 9-2350-256-20
CHAPTER 9:
MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
9-81 REPLACE/REPAIR BRAKE PEDAL AND BRACKET ASSEMBLYContinued
a. REMOVAL
1
Remove cotter pin (1) and straight pin (2) and
disconnect rod assembly, (3) from brake pedal (4).
2
Remove screw (5) and lockwasher (6)
3 Disconnect steering rod (7) from lever (8) by
removing two cotter pins (9), straight pin (10), and
two washers (11).
4 Disconnect shifting rod (12) from lever (8) by
removing cotter pm (13) and straight pin (14).
5
Remove spade release bracket (15) by removing
two screws (16) and two lockwashers (17).
6
Loosen nuts (18 and 19) and remove throttle control assembly (20) and fuel shutoff (21) from bracket (22).
7
Remove bracket (22) by removing two screws (23), two flat washers (24), two lockvvashers (25), and two nuts
(26).
8
Remove brake pedal and bracket assembly (27) by removing two screws (28), two lockwashers (29), and two
nuts (30).
b. DISASSEMBLY
1
Remove cotter pm (31) and straight pm (32).
2
Pull cam rod (33) out of bracket (34) and remove cam (35), spring (36), and collar (37).
3
Remove screw (38) and nut (39) from cam rod (33).
9 - 2 0 0
Change 1