CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-89 REPLACE/REPAIR BRACKET ASSEMBLIES FOR SIDE TOW BAR AND SIDE TOW CABLES-Continued
a. REMOVAL
1
Remove two tow cables (1) by loosening six wingnuts (2) and opening six clamps (3).
2
Remove tow bar (4) by loosening two nuts (5) and opening two clamps (6).
NOTE
The following procedures are the same for both forward and rear bracket assemblies.
3
Remove bracket assembly (7) by removing four screws (8) and four lockwashers (9).
9-216