SECTION VI: EXTERIOR STOWAGE
TM 9-2350-256-20
b. DISASSEMBLY
1
Remove cotter pin (10), straight pin (11), and clamp
(6).
2
Remove nut (12), lockwasher (13), and flat washer
(14).
3
Remove cotter pin (15), straight pin (16), and
eyebolt (17) from bracket (18).
c. ASSEMBLY
1
Install clamp (6) on bracket (18) with straight pin
(11) and new cotter pin (10).
2
Install straight pin (16), new cotter pin (15), and
eyebolt (17).
3
Install flat washer (14), new lockwasher (13), and
nut (12).
d. INSTALLATION
1 Install bracket assembly (7) using four new lockwashers (9) and four screws (8).
2 Install tow bar (4) and secure with two clamps (6). Tighten two nuts (5).
3 Install two tow cables (1) by closing six clamps (3) and tightening six wingnuts (2).
9-90 REPLACE TARPAULIN TRAY
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (4) (Appendix G, item 130)
a. REMOVAL
1
Remove two straps (1).
2
Remove tarpaulin tray (2) by removing four screws
(3) and four lockwashers (4).
b. INSTALLATION
1
Install tarpaulin tray (2) using four new
lockwashers (4) and four screws (3).
2
Install two straps (1).
9-217