CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
9-91 REPLACE 10-TON SNATCH BLOCK AND TRACK LINK RETAINERS
THIS TASK COVERS
Tool kit, general mechanic's
Lockwashers (8) (Appendix G,
Snatch block and track links
(Appendix C, item 53)
removed (refer to TM 9-2350-
Lockwashers (14) (Appendix
G, item 134)
Removal and installation procedures are the same for both left- and right-side track link retainers.
Left side shown.
Snatch block and track links shown for clarity.
Remove snatch block bracket (1) by removing four screws (2) and four lockwashers (3).
Remove retainer (4) by removing nut (5) and lockwasher (6).
Remove six track link retainers (7) by removing six nuts (8) and six lockwashers (9).
Install six track link retainers (7) using six new lockwashers (9) and six nuts (8).
Install retainer (4) using new lockwasher (6) and nut (5).
Install snatch block bracket (1) using four new lockwashers (3) and four screws (2).
Follow-on maintenance: Install snatch block and track link (refer to TM 9-2350-256-10)