SECTION I: PERSONNEL HEATER AND CONNECTING COMPONENTS
TM 9-2350-256-20
10-3 REPLACE PERSONNEL HEATER FUEL FILTER
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (2) (Appendix G, item 129)
Lockwashers (2) (Appendix G, item 130)
a. REMOVAL
1 Shut off fuel at shutoff valve (1) .
2 Remove shield (2) by removing two screws (3) and
two lockwashers (4).
WARNING
Fuel line and filter contain fuel. Exercise
caution when removing to prevent spilling
fuel on deck.
3 Disconnect two fuel lines (5) at fuel filter (6) and
remove adapter (7).
4 Remove fuel filter (6) by removing two screws (8)
and two lockwashers (9).
5 Remove shutoff valve (1) from fuel filter (6).
b. INSTALLATION
1 Install shutoff valve (1) on fuel filter (6).
2 Install fuel filter (6) with two screws (8) and two
new lockwashers (9).
WARNING
Ensure fuel lines do not leak after
installation. Fuel is flammable and can
cause severe injury or death to personnel.
3 Install adapter (7) and connect two fuel lines (5).
4 Check for leaks.
5 Install shield (2) with two screws (3) and two new
lockwashers (4).
10-7