SECTION V: TROUBLESHOOTING
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry contacts a metal
surface a direct short may result in instant
heating of tools, damage to equipment, and
injury or death to personnel.
C Place red lead of multimeter in socket C of wire
91 (ground) and black lead to ground. Check for
continuity. If continuity is present, go to step D. If
continuity is not present, repair/replace wire 91
(ground) of headlight and dimmer switch wiring
harness (see paragraph 6-65).
D Place red lead of multimeter in socket G of wire
16 and black lead to ground. Turn MASTER
switch on, UNLOCK and place main lighting
switch in SER. DRIVE position, auxiliary switch in
any position other than PARK, and check for
voltage. Turn MASTER and main lighting
switches OFF. If voltage is present, go to step E.
If voltage is not present, go to step F.