7 Remove brake air valve linkage (14) by removing
two cotter pins (15) and two straight pins (16).
Do not scratch or damage saddle caps. A
defective cap may cause oil leaks after
installation. Remove nicks and burrs prior
8 Remove six screws (17) and six lockwashers (18)
each from left and right transmission mounting
saddle caps (19).
9 Remove left and right transmission mounting
saddle caps (19) by using one of previously
removed screws (17) as jacking screw in tapped
10 Remove left and right coupling retainers (21).
11 Place each fabricated stop (22) between left and
right output reduction unit and flanges.