CHAPTER 3: MAINTENANCE OF ENGINE
3-1 REPLACE POWERPLANT-Continued
Remove steering clutch housing output shaft parts kit (74). Uncover left and right output reduction
assemblies in hull.
When installing powerplant, be sure transmission guide rollers (75) are inserted into transmission
guide rails (76).
Be sure that all tape, caps, and other protective closure items have been removed before installation.
Install two new preformed packings (72) on each side of transmission saddle (73).
All personnel must stand clear during lifting operation. A swinging or shifting load may cause injury
or death to personnel.
Install powerplant (70) in vehicle hull (71) using sling (69)
3 - 8