SECTION III: AIR INTAKE SYSTEM
TM 9-2350-256-20
Left Side
5
Install tube assembly (22) with two new
lockwashers (21) and two screws (20).
6
Install air hose (18) and two clamps (17).
7
Install air duct (19), air hose (16), and clamps (15).
8
Install air intake hose (14) and tighten clamps (13).
Both Sides
9
Install air intake hose (5) and two clamps (4).
10 Install new preformed packing (12) and connect air
cleaner restriction indicator hose (11).
11 Install right and left side of elbow assembly (10)
with two nuts (9), two flat washers (8), two new
lockwashers (7), and two screws (6).
12 Install three retaining rods (1), three new cotter
pins (2), and three straight pins (3).
NOTE
Follow-on maintenance:
Close air inlet doors
(see paragraph 9-56)
Install left and center-
front air inlet grilles
(see paragraph 9-57)
Install APU access cover
(see paragraph 949)
Install engine deck
(see paragraph 9-51)
Install air cleaner (see
paragraph 4-24)
4-57