CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-9 REPLACE/REPAIR ELECTRICAL ACCESSORIES PANEL
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (2) (Appendix G, item 113)
Lockwashers (22) (Appendix G, item 114)
Lockwashers (4) (Appendix G, item 116)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and burns.
NOTE
Identify connectors upon removal to ensure proper installation.
a. REMOVAL
1
Disconnect connector (1).
2
Remove four screws (2), four lockwashers (3), and accessories panel (4).
b. DISASSEMBLY
1
Unscrew and remove two light lenses (5) and two preformed packings (6).
2
Remove two lamps (7) by depressing and turning counterclockwise.
3
Remove two gaskets (8).
4
Remove two indicator lights (9) by removing two screws (10) and two lockwashers (11) from each.
5
Disconnect connector (12) from each indicator light (9).
6-26