CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-10 REPLACE/REPAIR MAIN SWITCH PANEL ASSEMBLY-Continued
b. DISASSEMBLY
1
Remove ground strap (4) and retainer (8) by
removing two screws (9), lockwasher (10), and two
flat washers (11) from main switch panel (6).
2
Remove mount (12) by removing four rivets (13).
3
Unscrew and remove light lens (14) and preformed
packing (15).
4
Remove
lamp
(16)
by
depressing
and
turning
counterclockwise.
5
Remove gasket (17).
6
Remove
indicator
light
(18)
by
removing
two
screws (19) and two lockwashers (20).
7
Disconnect connector (21) from indicator light (18).
8
Remove ID plate (22) by removing two drivescrews
(23).
9
Remove three ID plates (24), two switches (25), and switch (26) by removing two screws (27) from each.
10 Disconnect two connectors (28) from two switches (25) and three connectors (29) from switch (26).
11 Remove switch guard (30), ID plate (31), and switch (32) by removing two screws (33).
12 Disconnect two connectors (34) from switch (32).
6-32