SECTION IV: LIGHTING SYSTEM
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and bums.
Removal and installation procedures are the same for both left and right headlights.
Loosen adjustment nut (1) and remove headlight
1 Remove four screws (3), four lockwashers (4), and
cover (5) with shield (6) from headlight assembly (2).
2 Remove and discard gasket (7).
3 Remove two lenses (8) by removing six screws (9),
six lockwashers (10), and two retainers (11) from
4 Remove two gaskets (12) from two lenses (8).