CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-34 REPLACE/REPAIR DOME LIGHT--Continued
c. ASSEMBLY
NOTE
Clean and dry all parts, paying particular attention to contacts.
1
Install new rubber seal (12) in door assembly (5).
2
Connect lead (9) using screw (10) and new
lockwasher (11).
3
Install two lamps (8) by depressing and turning
clockwise.
4
Install door assembly (5) using eight screws (6)
and retaining rings (7).
d. INSTALLATION
1
Install dome light (2) on vehicle using four screws
(3) and four new lockwashers (4).
2
Connect connector (1).
6-35 REPLACE/REPAIR WINCH ILLUMINATION LAMP ASSEMBLY
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts:
Equipment Condition:
Tool kit, general mechanic's
Lockwasher (Appendix G,
Stowage basket intermediate
(Appendix C, item 53)
item 132)
forward floor plate removed
(see paragraph 9-21)
6-72