CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-53 REPLACE/REPAIR SWITCH PANEL, RADIO, AND BILGE PUMP TO
BULKHEAD WIRING HARNESS (11671798)-Continued
b. DISASSEMBLY
Disassemble wiring harness (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d. INSTALLATION
1
Connect connectors (11 and 12) to switch panel to gage panel and miscellaneous switches wiring harness (31).
2
Connect connector (10) to red flasher circuit breaker (30).
3
Install ground lead (9) to hull (27) using new lockwasher (29) and screw (28).
4
Connect connector (8) to communication system (26).
5
Connect connector (7) to communication system (25).
6
Install ground lead (6) to hull (22) using new lockwasher (24) and screw (23).
7
Connect connector (5) to bilge pump circuit breaker to switch panel lead assembly (21).
8
Connect connectors (2, 3, and 4) to accessories panel wiring harness (20).
6
118