CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-67 REPLACE/REPAIR TURN SIGNAL FLASHER WIRING HARNESS (11672273)--Continued
5
Disconnect connector (4) from front signal light (11).
b. DISASSEMBLY
Disassemble wiring harness (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d. INSTALLATION
1
Connect connector (4) to front signal light (11).
2
Connect connector (2) to flasher light (10).
3
Connect connector (3) to flasher switch (9).
4
Connect connector (1) to thermal flasher (8).
5
Install eight clamps (5) using new lockwasher (7) and screw (6) for each.
6-68 REPLACE/REPAIR B.O. SELECTOR LEAD ASSEMBLY (10911920)
THIS TASK COVERS
a.
Removal
b.
Disassembly
c.
Assembly
d.
Installation
INITIAL SET-UP
Equipment Condition:
Main switch panel removed (see paragraph 6-10)
6-174