SECTION V: VEHICLE WIRING
TM 9-2350-256-20
5 Disconnect connector (7) from master relay (15).
6 Disconnect connector (8) from circuit breaker (16).
b. DISASSEMBLY
Disassemble wiring harness (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d. INSTALLATION
1 Connect connector (8) to circuit breaker (16).
2 Connect connector (7) to master relay (15).
3 Connect three connectors (4, 5, and 6) to left
taillight (14).
4 Connect two connectors (2 and 3) to right taillight (13).
5 Connect connector (1) to bulkhead disconnect (12).
6 Install 11 clamps (9) using screw (10) and new lockwasher (11) for each.
NOTE
Follow-on maintenance: Install engine deck (see paragraph 9-51)
6-183