SECTION V: VEHICLE WIRING
TM 9-2350-256-20
a. REMOVAL
1 Remove 10 clamps (10) by removing screws (11) and lockwasher (12).
2 Disconnect two connectors (1 and 4) from APU armature relay (13).
3 Disconnect two connectors (2 and 6) from main engine armature relay (14).
4 Disconnect three connectors (3, 7, and 8) from switching relay box assembly (15).
5 Disconnect connector (5) from bulkhead to main engine bracket and rear fuel tank transmitter wiring harness (16).
6-221