SECTION V: VEHICLE WIRING
TM 9-2350-256-20
3 Disconnect two leads (2 and 3) from starter (12) by removing nut (13) and lockwasher (14).
b. DISASSEMBLY
Disassemble ground cable (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble ground cable (see Chapter 6, Section VII).
d. INSTALLATION
1 Connect two leads (2 and 3) to starter (12) using lockwasher (14) and nut (13).
2 Connect connector (1) to engine disconnect (8) using four nuts (11), four new lockwashers (10), and four
screws (9).
3 Install clamp (5) using new lockwasher (7) and screw (6).
NOTE
Follow-on maintenance: Install powerplant (see paragraph 3-1)
6-91 REPLACE/REPAIR SMOKE GRENADE LAUNCHER SYSTEM WIRING
HARNESS (11672299)
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts::
Tool kit, general mechanic's (Appendix C, item 53)
Lockwasher (Appendix G, item 131)
Lockwashers (4) (Appendix G, item 116)
6-239