TM 9-2350-256-20
CHAPTER 8: MAINTENANCE OF SUSPENSION SYSTEM
8-4 REPLACE/SERVICE ROADWHEEL HUB ASSEMBLY-Continued
5 Remove pipe plug (13), lubrication fitting (14), and bushing (15) from hub assembly (16).
6 Remove eight screws (17), eight lockwashers (18), hub assembly (16), and gasket (19) from arm (20).
7 Remove inner cone bearing (21).
8 Remove hub seal assembly (22) from arm (20).
9 Remove inner hub bearing cup (23) from hub (24) using remover, replacer, and handle.
10 Remove outer hub bearing cup (25) from hub (24) using remover, replacer, and handle.
11 Remove 10 bolts (26) from hub (24).
8-10