CHAPTER 9: MAINTENANCE OF HULL - AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-8 REPLACE REAR INTERMEDIATE RIGHT FLOOR PLATE
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Equipment Conditions:
Tool kit, general mechanic's (Appendix C, item 53)
Rear intermediate right access cover removed
(see paragraph 9-9)
Parts:
Rear intermediate right access floor plate
Lockwashers (4) (Appendix G, item 118)
removed (see paragraph 9-10)
Rear center floor plate removed (see paragraph
9-12)
Personnel heater removed (see paragraph 10-1)
a. REMOVAL
Remove four screws (1), four lockwashers (2), four flat washers (3), and floor plate (4).
b. INSTALLATION
Install floor plate (4) with four flat washers (3), four new lockwashers (2), and four screws (1).
NOTE
Follow-on maintenance:
Install personnel heater (see paragraph 10-1)
Install rear center floor plate (see paragraph 9-12)
Install rear intermediate right access floor plate (see paragraph 9-10)
Install rear intermediate right access cover (see paragraph 9-9)
9-10