TM 9-2350-256-20
CHAPTER 9:
MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
9-29 REPLACE/REPAIR MECHANICS CAB-TOP DOOR AND RELATED PARTS-
Continued
5
Install assembled shaft housing (5) with five screws
(9) and five new lockwashers (10).
6
Install new seal (8) on mechanics cab-top door (1)
with adhesive.
7
Install mechanics cab-top door (1) into shaft
housing (5).
8
Install control arm (6) with new self-locking nut (2),
arm control pm (4), washer (7), and new self-
locking nut (3).
9-30 REPLACE/REPAIR RIGGERS CAB-TOP DOOR AND RELATED PARTS
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Material/Parts:
Personnel Required:
Tool kit, general mechnaics
Adhesive (Appendix D, item 1 or 2)
Three
(Appendix C, item 53)
Gasket (Appendix G, item 75)
Pliers set, retaining
Lockwashers (11) (Appendix G, item 132)
Reference:
(Appendix C, item 29)
Nut, self-locking (Appendix G, item 163)
Deleted
Nuts, self-locking (2) (Appendix G, item 171)
Packing (Appendix G, item 180)
Pin, cotter (Appendix G, item 211)
Strip, rubber (Appendix G, item 271)
9 - 5 0
Change 1