SECTION II: HULL AND CAB COMPONENTS
TM 9-2350-256-20
7
Install access cover (8), new gasket (9), and access
cover (10) inside rigger's cab-top door (1) with six new
lockwashers (12) and six screws (11).
8
Install new rubber strip (13) on rigger's cab-top door (1)
with adhesive.
9
Install rigger's cab-top door (1) into shaft housing (5).
10 Install control arm (6) with new self-locking nut (2), arm
control pin (4), washer (7), and new self-locking nut (3).
9-53